Fabric Cutting Planner

See the layout, compare 180° rotation, and estimate fabric needed.

PLANNING SIMULATION — NOT APPROVED FOR PURCHASING. Layouts use improved estimated garment shapes, not actual cutting patterns. Confirm at least one actual cutting layout and fabric loss with the factory before placing fabric or yarn orders. The 5% extra loss is a separate planning allowance, not a promise that layout waste is below 5%.

1. Fabric & Cutting

Actual Width (in)

Label Width (in)

Cutting Width (in)

Extra Loss (%)

Length Allowance (in)

Width Allowance (in)

Seam Allowance (in)

Body / Sleeve Hem (in)

Layers per Lay

Groups per LayoutRepeat the size mix to fill space better

Armhole Shape (%)Estimated curves, not real pattern files

Layout MethodOnly 0° and optional 180° — never 90°.

Space Between Pieces (in)Set factory-required spacing when known. The drawn outlines remain estimates.

Actual 79" · Label 78" · Cutting 76" are shown separately. Pieces are only placed inside Cutting Width.

2. Sizes & Pieces

Pieces = shirts in one size mix. Groups per Layout repeats the mix to make a fuller cut. Do not mix different fabric colors or materials.

Size	Size Mix	Order Qty

Add the exact order quantities per size to estimate fabric for your order.

3. Other Fabric

Rib and tape are separate from main jersey. Leave fields empty until factory values are confirmed.

Rib per Piece (yd)

Tape per Piece (yd)

A value entered here is assumed to be a verified allowance. It is not calculated from a neckline pattern.

4. Edit Tee Specs (20 measurements)

Base specs below follow the latest Men's and Youth tables you supplied. All measurements are in inches. You can edit them for another style. Changes affect the geometry when applicable.

Point of Measure	S	M	L	XL	XXL

Fabric Used—inside Cutting Width

Cutting Waste (Goal <5%)—inside the cutting area

Fabric per Shirt—yd · jersey only · before 5%

Layout Length—in · per cutting layer

5. Fabric Layout

Outer edge = Actual Width; dashed = Label Width; inside lines = Cutting Width.

Estimated shapes

Body FrontBody BackSleeveUnused cutting space

Ready

6. Compare Layouts

Result	No Rotation	180° Allowed	Difference
Run the layout calculation.

Historical reference: the boss recorded 0.788 yd/shirt net on a different, unidentified historical size/pattern. This is not a calibration input or a promise for the current grading.

About the estimates
The visual uses estimated shapes from your Specs, plus your sewing and process allowances. These are not verified cutting patterns. The model does not account for actual grain line, nap, fabric lay style, or cutting tool width until confirmed. The 180° option always keeps the better no-rotation result. Left/right sleeves are separate pieces and 90° turning is not allowed. Fabric Used below 95% means your 5% waste goal was not reached.

7. Fabric for the Order

Planning-only totals. Enter the actual units for one fabric/color group. For orders, use verified fabric consumption before purchasing.

Enter order quantities to see preliminary totals.

8. What Is Included?

Main Jersey: front + back + 2 sleeves	Estimated
Neck Rib	Not set
Neck & Shoulder Tape	Not set
Real Pattern Fit & Cut Test	Factory cut pending
Purchase Approval	Not approved